Pd (Pedestrian Detection) - Value-Top VT-1104WL User Manual

USER MANUAL

5.1.8.4 PD (Pedestrian Detection)

Pedestrian Detection function detects the moving people in a pre-defined region, and a series of
actions can be taken when the alarm is triggered.
Channel: to select the channel you want to configure
Switch: to enable or disable the PD function
Buzzer: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Level: Small, Middle & Big. Small level is recommended to detect objects in long
distance. Big level is recommended to detect objects in short distance.
Scene: Scene setting includes Indoor and Outdoor. Please choose the scene to
match with the place your camera installed.
Recording: You can set how long after an event occurs that the DVR will continue to record.
Post
Time: To configure the external alarm time when the detection is triggered.
Latch
Alarm Out: If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message: A letter "S" will be displayed on the screen when the intelligent detection is
triggered.
Send Email: If an alarm is triggered, an Email will be sent to your preset email account.
When the detection is triggered, the channel will be enlarged into full screen.
Full Screen:
to select the channel(s) you want to record when a detection is triggered.
Record Channel:
Click [Setup] to draw a virtual region in the camera picture.
Area:
37