Fd (Face Detection) - Value-Top VT-1104WL User Manual

USER MANUAL

5.1.8.5 FD (Face Detection)

Face Detection function detects the faces of moving people appear in a pre-defined region, and a
series of actions can be taken when the alarm is triggered.
Channel: to select the channel you want to configure
Enable: to enable or disable the FD function
Buzzer: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Level: Small, Middle & Big. Small level is recommended to detect objects in long
distance. Big level is recommended to detect objects in short distance.
Scene: Scene setting includes Indoor and Outdoor. Please choose the scene to
match with the place your camera installed.
Post Recording: You can set how long after an event occurs that the DVR will continue to record.
Time: To configure the external alarm time when the detection is triggered.
Latch
Alarm Out: If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message: A letter "S" will be displayed on the screen when the intelligent detection is
triggered.
If an alarm is triggered, an Email will be sent to your preset email account.
Send Email:
When the detection is triggered, the channel will be enlarged into full screen.
Full Screen:
to select the channel(s) you want to record when a detection is triggered.
Record Channel:
Click [Setup] to draw a virtual region in the camera picture.
Area:
39