S.m.a.r.t - Value-Top VT-1104WL User Manual

2. Use the dropdown next to
type.
3. Click the numbered boxes representing channels to record channels to HDDs in the selected
group.
4. Click to save.
Apply

5.5.1.2 S.M.A.R.T

This function can be used to display technical information on the hard drive installed inside your
DVR. You can also perform a test (there are three types available) to evaluate and detect potential
drive errors.
Whole Evaluation not passed, continue to use the disk:
developed a fault (such as one or more bad sectors), you can instruct your DVR to continue saving
to the drive.
Self-check Type: There are three types available:
Short: This test verifies major components of the hard drive such as read/write heads, electronics
and internal memory.
Long: This is a longer test that verifies the above as well as performing a surface scan to reveal
problematic areas (if any) and forces bad sector relocation
Disk Group to select the specific group within the selected group
60
USER MANUAL
If for some reason the hard drive has