Video Cover - Value-Top VT-1104WL User Manual

Click Alarm button to configure the PIR detection alarm function:
Buzzer: The DVR can use its internal buzzer to emit an alarm tone. You can set the buzzer
duration in seconds when the PIR is detected.
Alarm Out: Optional function. If your DVR support to connect to external alarm device, you can
set to emit an alarm tone.
Latch Time: To configure the external alarm time when PIR detection is triggered.
Record: Click icon and choose which channel(s) you want to record when the PIR detection
is triggered.
Post Recording: You can set how long after an event occurs that the DVR will continue to record.
The recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message: Check the box to display PIR on the live view screen when the PIR alarm is
detected.
Email: You can let the DVR to send you an auto-email when PIR detection is triggered.
Send
Screen: If this function is enabled and PIR is detected in a channel, you will see that channel
Full
in full screen.

5.1.7 Video Cover

This menu allows you to create privacy zone(s) if you want to partially cover some certain part of
the image. You can create up to 4 privacy zones in any size and location on the camera image.
29
USER MANUAL