Specifications - Projecta INTELLI-CHARGE DC/SOLAR BATTERY CHARGER IDC25L Instruction Manual

SPECIFICATIONS

Operating Conditions
Alternator Input Voltage
Maximum Solar Input Voltage
Maximum Input Current
Input Current (No Load)
Back Drain on Auxiliary Battery
External LED Output – Constant Current
Output Current
Input Fuse Rating
Output Fuse Rating
Maximum Output Power
Solar Input Turn On Voltage
Size
Weight
Operating Temperature (Derated from 55
Charge Mode
Charge Type
Soft Start 1
Soft Start 2
Bulk *20A at 9-11Vdc, 25A at 11-32Vdc
Absorption
Float
Power Supply Mode
Output
Battery Range
Battery Capacity
Type of Batteries Supported
Operating Mode
VSR Mode – Default (Ignition Override
Not Connected)
Low Voltage Mode – Ignition Override cable
connected to ignition switch (ignition on)
Standards
EMC
IP Rating
C) -10 to +80
o
Constant 1.25A if 2V< Auxiliary Battery Voltage <8V
Constant 6.25A if 8V< Auxiliary Battery Voltage <10V
*Constant Current up to: 14.5V
Constant Voltage until current drop to 2.5A 14.5V
Keep Constant Voltage at 13.5V
Constant 13.8V (current limited to 25A)
Lithium Iron Phosphate (LiFePO
12V Vehicle
Turn on
13.4-20V
Turn on
12.2-20V
C-Tick, AS/NZS CISPR11:2011 Class B
9–32Vdc
28Vdc
40A
20mA
9.5 – 10.5mA
4 mA
Input 9–11Vdc: 20A
Input 11V–32dc: 25A
50A (Not supplied)
50A (Not supplied)
362.5W
9V
149 x 122 x 42 mm
800g
C (Ambient Temperature)
o
5 Stage
75–300Ah
24V Vehicle
Turn off Turn on
<12.8V 26.8-32V
Turn off Turn on
<11.9V 24.4-32V
IP67
)
4
Turn off
< 25.6V
Turn off
<24V
5