Cooling Fan; Specifications - Projecta INTELLI-CHARGE IC7 Manual

POLARITY PROTECTION
Prevents the output leads from sparking due to accidental reverse connection or short
circuit making the charger safer to use around batteries.
OVER TEMPERATURE PROTECTION
If the temperature within the charger rises too high, the charger will begin to cool down
by turning on the fan, and if the temperature continues to rise it will begin reducing the
power output. If still unsuccessful, the charger will shutdown until it cools down.
SWITCHMODE TECHNOLOGY
Using the latest technology in battery chargers, switchmode chargers convert 240VAC
power to 12VDC power using electronic components unlike traditional battery chargers
that rely on heavy transformers. This allows the charger to be lightweight and compact
without sacrificing on performance.

COOLING FAN

The charger is fitted with a thermostatically controlled fan to cool onboard electronics
and maintain charging performance. The cooling fan will engage automatically when
there is a high load on the battery or there is sufficient heat build up.
REMOTE CONTROL DISPLAY*
Control and monitor the charger's performance from a remote control display, allowing
the charger to be flush or surface mounted out of the way and out of sight. The battery
charger and remote are synchronised for operation either locally or by remote.
* Available as optional extra for P/No. IC15 only, not supplied with unit but can be
purchased separately (P/No. ICREMOTE)

SPECIFICATIONS

P/No.
Type
Input (Nominal)
Input Power
Output Voltage
Output Current
Minimum Start Voltage
Back Drain
66
IC7 & IC7W
7/5 stage
230-240VAC, 50Hz
110W
12V
7A, 4A, 2A, 1A
2V
1mA
IC10 IC15
7/5 stage 7/5 stage
230-240VAC, 50Hz 230-240VAC, 50Hz
160W 240W
12V 12V
10A, 6A, 4A, 2A 15A, 8A, 4A, 2A
2V 2V
1mA 1mA (with remote 2mA)