Table of Contents
Advertisement
STEP 6B – ENGINE START
a. Allow the charger to boost charge the battery for 5 minutes (refer Step 4 "BOOST").
b. Switch the Charge/Engine Start switch to ENGINE START and turn the ignition key to start the engine.
c. If the engine fails to start after 3 seconds, wait 2 minutes before attempting to start the engine again.
Note: Do not repeat this operation more than 5 times.
STEP 7 – DISCONNECTION
Turn the charger's On/Off switch to OFF.
Turn the 240V mains switch to OFF and disconnect the charger from the 240V mains power.
Battery out of vehicle
Remove the BLACK lead (battery clip) from the battery.
Remove the RED lead (battery clip) from the battery.
Battery in vehicle
Remove the chassis connection.
Remove the battery terminal connection.
SPECIFICATIONS
P/No:
Type
Input (Nominal)
Input Power
Output Voltage
Output Current
Engine Start
Minimum Start Voltage
Back Drain
TYPES OF BATTERIES
Fuses
Input (small glass fuse)
Output
Size (mm)
Weight
Approvals
To order output fuses, use P/No. HDBCF30A (20 pieces)
Battery Range
Automotive
Marine
HDBC21
Manual
240VAC, 50Hz
300W
12V
11.0A at 12V (normal)
14.0A at 12V (boost)
3 sec on, 2 min off
80A at 6V
0.0V
5mA
12V lead acid batteries
1 x 4A
1 x 30A
290 x 220 x 200
7.0kg
Electrical Safety, EMC
HDBC21
300–1000CCA
550–1300MCA
HDBC33
Manual
240VAC, 50Hz
800W
12V & 24V
12.0A at 12V (normal)
20.0A at 12V (boost)
3 sec on, 2 min off
12V
120A at 6V
0.0V
12V
5mA
12V & 24V lead acid batteries
1 x 6.3A
2 x 30A
290 x 220 x 200
9.5kg
Electrical Safety, EMC
HDBC33
450–1500CCA
600–1800MCA
12.0A at 24V (normal)
20.0A at 24V (boost)
24V
120A at 12V
24V
11mA
Charge Time (hrs)
6–15
8–18
5
Advertisement
Table of Contents
