Table of Contents
Advertisement
WARNINGS
•
Explosive gases may escape from the battery during charging.
Prevent flames and sparks and provide adequate ventilation
•
Before charging, read the instructions
•
FOR CHARGING 12 VOLT LITHIUM IRON PHOSPHATE BATTERIES ONLY
•
Do not attempt to charge non-rechargeable batteries
•
Never charge a frozen battery or when ambient temperature is below 0°C
•
Corrosive and/or toxic substances may escape from the battery during charging and
damage delicate surfaces. Store and charge in a suitable area
•
This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely
•
Young children should be supervised to ensure that they do not play with the
appliance
•
Fit fuses as close to the batteries as possible to protect the cable in case of
short circuit
FEATURES
The IDC25L DC-DC charger is purposely designed for charging auxiliary batteries.
It includes all the features needed to maintain the auxiliary battery to its optimum
condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The IDC25L converts your vehicle's 12VDC/24VDC alternator power to the voltage
level allowing your batteries to be fully charged, prolonging battery life and
reliability. With the latest synchronous switching technology, efficiency of IDC25L
exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the IDC25L simultaneously. Solar input takes
precedence if solar and alternator inputs are present. When solar input cannot provide
enough energy to the load, the IDC25L will draw power from solar and alternator
simultaneously.
SOLAR MPPT
The IDC25L utilises sophisticated MPPT (Maximum Power Point Tracking) solar
regulator technology. MPPT maximises the power generated from the solar panels
to the auxiliary battery.
2
Hide quick links:
Advertisement
Table of Contents
