General Information; Technical Specifications - Timeguard MLSA360N Installation & Operating Instructions Manual

1. General Information

These instructions should be read carefully and retained for further
reference and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the
PIR sensor is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this PIR sensor and install in accordance with the
current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this PIR sensor
is fitted does not exceed the rating of the circuit cable, fuse or
circuit breaker.

3. Technical Specifications

• 230V AC 50 Hz
1
• This PIR is of Class ll Construction and must not be earthed
• Motion Detection Range:
• Detection Angle:
• Maximum Switching Load:
• Time ON adjustment:
• Dusk Level Adjustment:
• IP45 Rated for restricted external applications
• CE Compliant
• EC Directives:
• Manual Override
Up to 12 metres
360°
3000W Halogen Lighting
500W Fluorescent Lighting
140W LED Lighting
150W Discharge Lighting (SON, HQI)
5 seconds to 12 minutes
Day and Night or Night time only operation
Conforms to latest directives