Electrical System - KTM Freeride E-SX Owner's Manual

5

ELECTRICAL SYSTEM

5.1 KTM PowerPack charger
5.1.1 Overview of the KTM PowerPack charger
Danger
Danger of injury
Do not use the charger if the charger is faulty or damaged.
Contact an authorized KTM workshop.
Danger
Danger of injury
Only use the charger in dry environments.
The charger is designed for the following specifications:
Line voltage: 230 V
Line frequency: 50 Hz
1 Residual current circuit breaker
2 Charger switch off
3 Charger switch on
4 Charger
5 Charge mode switch
6 Charge status indicator
7 Status indicator
8 LED for charger fault
9 LED for KTM PowerPack fault
A faulty or damaged charger or device component, including cables and
connections, poses an electric shock hazard.
Using the charger in a wet environment poses an electric shock hazard.
12