3
CONTROLS
3.5 Multifunction display
3.5.1 Overview
3.5.2 Error message
3.5.3 Map Select button
Map Select button
1
Drive mode indicator
2
Electric motor indicator lamp (MIL)
3
Charge state indicator
4
For troubleshooting, see page 18, Section 8, Troubleshooting.
If there is a fault in the system, the yellow electric motor indicator lamp
(MIL)
flashes. Warning tones are emitted by the multifunction display
1
in time with the flashing lamp.
While the vehicle is being activated or self-tests of the vehicle electronics
are being performed, the yellow electric motor indicator lamp (MIL)
lights up.
The Map Select button
1
or ready mode.
The Map Select button
1
is only enabled when the vehicle is in standby
defines the drive mode, see Section 3.5.4.
6
1