Service Schedule - KTM Freeride E-SX Owner's Manual

9

SERVICE SCHEDULE

9.1 Service schedule
Read out the fault memory using the KTM diagnostics tool.
Check and charge the 12-V battery.
Check and charge the KTM-PowerPack.
Check the front brake linings.
Check the rear brake linings.
Check the brake discs.
Check the brake lines for damage and leakage.
Check the frame and swingarm.
Check the heim joints at the top and bottom of the shock absorber.
Check the tire condition.
Check the tire air pressure.
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension.
Check the chain, rear sprocket, engine sprocket and chain guide.
Check the chain tension.
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth operation.
Check the brake fluid level of the front brake.
Check the rear brake fluid level.
Check the travel of the brake levers.
Check the steering head bearing play.
Check all hoses and bellows for cracking, leaks and incorrect routing.
Check the antifreeze and coolant level.
Check the cables for damage and routing without sharp bends.
Check the sealing lips on the discharging plug for damage.
Check the screws and nuts for tightness.
Final check: Check the vehicle for safe operation and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service record.
○
One-time interval
●
Periodic interval
9.2 Service work (as additional order)
Change the front brake fluid.
Change the rear brake fluid.
Grease the steering head bearing.
Change the sealing lips on the discharging plug.
Perform a fork service.
Service the shock absorber.
Check the swingarm bearing.
Change the gear oil.
Every 20 operating hours
Once after 1 operating hour
Every 60 operating hours
Once after 20 operating hours
○
24
○ ●
●
○ ●
●
●
●
●
●
●
○ ●
○ ●
●
●
○ ●
○ ●
●
○ ●
○ ●
●
●
●
○ ●
○ ●
○ ●
●
○ ●
○ ●
○ ●
○ ●
○ ●
Annually
●
●
●
●
●
●
●
●