KTM Freeride E-SX Owner's Manual page 21

8 TROUBLESHOOTING
Fault
Fault in the throttle
grip
Fault in the rotor posi-
tion sensor
Fault in the
KTM PowerPack
Fault in the 12-V
supply
Fault in the motor
Fault in the onboard
network wiring harness
or in a switch
Fault in the ECU
Fault in the moisture
monitor
Fault in the
KTM PowerPack relay
Fault in the insulation
monitor
Blink Measure 1
code
41 Switch the main
switch off and on
42 Switch the main
switch off and on
43 Switch the main
switch off and on
44 Check the charge
state of the 12-V
battery
45 Switch the main
switch off and on
46 Switch the main
switch off and on
51 Switch the main
switch off and on
52 Switch the main
switch off and on
53 Switch the main
switch off and on
54 Dry and clean the
discharging con-
nectors on the mo-
tor and KTM Pow-
erPack
Measure 2
Check the throttle Contact an authorized
grip for external KTM workshop
damage
Contact an
authorized KTM
workshop
Contact an
authorized KTM
workshop
Install a new 12-V Contact an authorized
battery KTM workshop
Contact an
authorized KTM
workshop
Check the on- Contact an authorized
board network KTM workshop
wiring harness
and plug-in
connections for
external damage
Contact an
authorized KTM
workshop
Contact an
authorized KTM
workshop
Contact an
authorized KTM
workshop
Contact an
authorized KTM
workshop
Measure 3 Measure 4
20