Cleaning, Care; Cleaning The Motorcycle - KTM Freeride E-SX Owner's Manual

6

CLEANING, CARE

6.1 Cleaning the motorcycle

Note
Material damage
The high pressure forces water into the electrical components, connectors, bearings, etc. As a result, components may be
damaged or destroyed.
Never clean the vehicle and the KTM PowerPack with a high-pressure cleaner or a powerful jet of water.
Note
Material damage
Always mount the cover cap after removing the KTM PowerPack.
Do not direct the water jet toward the connector, even if the cover cap is mounted.
Info
To preserve the value and appearance of the vehicle, clean it regularly.
Avoid direct sunlight on the vehicle during cleaning.
The KTM PowerPack may be removed if desired but does not have to be.
The vehicle and the KTM PowerPack are not suitable for cleaning with high pressure
cleaners.
Water and dirt damage or destroy components.
- If the KTM PowerPack is removed for cleaning, mount the cover
cap
- Remove coarse dirt particles with a gentle spray of water.
- Spray very dirty areas with a commercial motorcycle cleaner and
clean with a brush.
Info
Do not apply motorcycle cleaner to the vehicle while it is dry. First rinse
the vehicle with water.
- Use warm water with commercially available motorcycle cleaner
and a soft sponge.
- After cleaning, rinse the vehicle thoroughly with a soft spray of
water.
- Dry the vehicle with a soft cloth.
Warning
Danger of accident
If the brake system is wet or dirty, apply the brakes carefully to dry
or clean them.
- Drive a short distance after cleaning.
.
1
Reduced braking efficiency due to a wet
or dirty brake system.
17