Adjustment - Ecom B Operating Instructions Manual

8. Adjustment

In addition to the already described fea-
tures of the ecom-B, various settings could
be made at the instrument. Select from the
main menu the sub-menu <Adjustment>
and confirm with <Enter>. A list of the pos-
sible settings is displayed and can be
changed according to usage. Scroll the
curser to the corresponding line and press
<Enter>:
Set clock
(setting can be made by pressing <Enter>):
-scroll with cursers (up / down) to the value
which should be changed
-activate the setting by pressing <Enter>
-set the time by using curser keys <up / down>
-confirm the setting by pressing <Enter>
-after finishing leave the menu with <ESC>
Display contrast (activate with <Enter>)
-set display contrast with curser (up / down)
-reset with <CAL>
Type of fuel (select after pressing <Enter>)
-change the fuel type
Unit (change with cursers (up / down)
-calculation of gas concentration in:
-ppm = volume concentration (parts per million)
3
-mg/m = mass concentration unit
-mg/kWh 0,0 % = Mass concentration per capacity unit calculated
with reference O
-ppm 0,0 % = volume concentration (parts per million) calculated with
reference O
2
3
-mg/m 0,0 % = mass concentration per capacity unit calculated with
reference O
2
ecom-B
2
Set clock
Display contrast
Type of fuel
Unit
O2 refer.
Air press.
Keyboard beep
AUX(COM)
Bluetooth
Eta(C)
Printout
Page 33