Minimal / Maximal Measurement Values; Printout Measurement Values; Contrast Adjustment And Lighting - Ecom DP Operation Manual

5.3. Minimal / Maximal measurement values

With <F3> (Min/Max) the determined minimal and maxi-
mal values since unit´s switch-on (or deleting via „CLR")
can be called up.
- Press one time <F3> (Min/Max) to view the lowest de-
termined values (Min/Max blinks).
- Press <F2> (CLR) to delete the minimal values (new
scanning begins).
- Press again <F3> (Min) to view the highest values
(Min/Max blinks).
- Press <F2> (CLR) to delete the highest values (new
scanning begins).
- Press one more time <F3> (Max) to quit the menu.

5.4. Printout measurement values

Press <F4> (Print) to transmit the current measurement
values via the infrared interface to the IR printer (option).
Condition hereto is a trouble-free connection (direct
sight) between the sending diode at the front of the in-
strument and the receiving diode of the printer. The dis-
tance between both instruments should not exceed 40
cm (1.3 foot), otherwise a trouble-free transmission is not
warranted at any time.
The printout can be made with the infrared printers ecom-
P and HP 82240B. Please choose the used printer, as
shown under chapter 8.3.

5.5. Contrast adjustment and lighting

Basing on the previous function seizure, the functions
„LUMI" and „Light" are displayed after pressing <F1>.
The graphic display of the ecom-DP can be adjusted to
different visual conditions. The contrast can be adjusted
in 5 steps (each key pressing = one step) while pressing
<F3> (LUMI). Additionally the backlighting of the display
can be activated while pressing <F4> (Light).
10
-----------------------------------
ecom-DP
-----------------------------------
Date Time
05.10.01 12:12:50
-----------------------------------
P
0.0 (hPa)
-----------------------------------
min max
P
-0.1 0.1 (hPa)
-----------------------------------
ecom GmbH
Am Grossen Teich 2
58640 Iserlohn
Tel. 02371-9455