Adjusting The Image; Zoom Adjustment; Focus Adjustment; Keystone Adjustment - Sanyo PLC-XU20E Owner's Manual

BASIC OPERATION
Press the ZOOM
1
Remote Control Unit to turn into the ZOOM mode.
Press the ZOOM
2
the ZOOM
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function. Refer to page 28 for the
Digital Zoom operation.
1 Press the FOCUS
Remote Control Unit to turn into the FOCUS mode.
2 Adjust the focus of the image by pressing the FOCUS
button.
If the picture obtained keystone distortion, correct screen with KEYSTONE adjustment.
Press the KEYSTONE
1
or select the Keystone on the SCREEN menu. (Refer to page
28, 29.) The message "Keystone" is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
/ button or the POINT UP/DOWN button(s). Press the
KEYSTONE
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE
button or the POINT UP button.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.
20

ADJUSTING THE IMAGE

ZOOM ADJUSTMENT

/ button(s) on the Top Control or on the
button to have the image larger, and press
button to have the smaller.

FOCUS ADJUSTMENT

/ button(s) on the Top Control or on the

KEYSTONE ADJUSTMENT

/ button on the Remote Control Unit
button or the POINT UP button to reduce the
The message disappears after 4 seconds.
/
The message disappears after 4 seconds.
Keystone
button or
The message disappears after 4 seconds.
Zoom
Focus