Table of Contents
Advertisement
Part Names and Functions
Remote Control
r
t
y
u
i
o
q STAND-BY button
Turn the projector off (p.26).
w WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
e SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted
from the laser light window or a signal is being sent
from the remote control to the projector (p.16).
r LASER LIGHT window
A laser beam is emitted from here (p.16).
t ON button
Turn the projector on (p.25).
y INPUT 1 – 3 buttons
Select an input source (INPUT 1 – INPUT 3)
(pp.34–35).
u AUTO PC button
Automatically adjusts the computer image to its
optimum setting (pp.31, 39).
i FREEZE button
Freeze the picture on the screen (p.31).
14
e
w
q
!1
!0
!2
o POINT
ed 7 8
( VOLUME + / – ) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.27).
– Pan the image in Digital zoom + mode (p.51).
– Adjust the volume level (with Point
(p.30).
!0 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (pp.16–17).
!1 INFO. button
Display the input source information (p.29).
!2 L-CLICK button
Acts as the left mouse button for wireless mouse
operation (p.17).
To ensure safe operation, observe the
following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning,
use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemical materials.
7 8
buttons)
Advertisement
Table of Contents
