Onboard Dram - National Instruments MXI-2 Reference Manual

Chapter 5 VXI-MXI-2 Configuration and Installation
a. Boot from User Configuration (Factory Configuration Protected) (Default)
b. Boot from Factory Configuration (Factory Configuration Protected)
c. Boot from User Configuration (Factory Configuration Unprotected)
d. Boot from Factory Configuration (Factory Configuration Unprotected)

Onboard DRAM

MXI-2 Configuration Reference Manual
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
Terminate MXIbus
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
Terminate MXIbus
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
Terminate MXIbus
Restore Factory Configuration
Change Factory Configuration
Automatic MXIbus Termination
Terminate MXIbus
The VXI-MXI-2 can accommodate up to two 1.35 in. 72-pin DRAM
SIMMs. You must remove the metal enclosure to access the SIMM sockets
and a switch that selects the SIMM size. To access these components,
remove the four screws on the top, the four screws on the bottom, and the
five screws on the right-side cover of the metal enclosure.
U35
No
No
Yes
Yes
U35
No
No
Yes
Yes
U35
No
No
Yes
Yes
U35
No
No
Yes
Yes
Figure 5-9. EEPROM Operation
5-14
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
ni.com