National Instruments MXI-2 Reference Manual page 29

Chapter 4 PXI-8320 Configuration and Installation
2
1
1 Ejector Handle
2 PXI Board
MXI-2 Configuration Reference Manual
7. Raise the injector/ejector handle until the module firmly seats into the
backplane.
8. Screw in the bracket-retaining screw at the top of the module to secure
the PXI-8320 to the chassis.
9. Check the installation.
Figure 4-2 shows how to install the PXI-8320. The National Instruments
PXI-8170 Series is shown installed in the system controller slot of the PXI
chassis. Place the PXI-8320 and any other PXI boards in any other slot.
4
3
Figure 4-2. Installing the PXI-8320 in a PXI Chassis
3 PXI-8170 Series Controller
4 PXI-1000B Chassis
4-4 ni.com