National Instruments MXI-2 Reference Manual page 108

SYSFAIL
SYSRESET
System RAM
T
trigger
TTL
U
user window
V
V
VDC
VME
VMEbus System
VXIbus
© National Instruments Corporation
A VMEbus signal that a device uses to indicate an internal failure. A failed
device asserts this line. In VXI, a device that fails also clears its PASSed bit
in its Status register.
A VMEbus signal that a device uses to indicate a system reset or power-up
condition.
RAM installed on your personal computer and used by the operating
system, as contrasted with onboard RAM, which is installed on the MXI-2
board.
Either TTL or ECL lines used for intermodule timing.
Transistor-Transistor Logic
A region of PCI address space reserved by the PCI-MXI-2 or PXI-8320 for
use via the NI-VXI low-level function calls.
address space to allocate regions for use by the
macros.
VXIpoke()
Volts
Volts direct current
Versa Module Eurocard or IEEE 1014
A device configured for installation in Slot 0 of a VXIbus mainframe
Controller or Slot 1 of a VMEbus chassis. This device is unique in the
VMEbus system in that it performs the VMEbus System Controller
functions, including clock sourcing and arbitration for data transfers across
the backplane. Installing such a device into any other slot can damage the
device, the VMEbus/VXIbus backplane, or both.
VMEbus eXtensions for Instrumentation
G-9 MXI-2 Configuration Reference Manual
uses this
MapVXIAddress()
and
VXIpeek()
Glossary