Configuration Eeprom; Onboard Dram - National Instruments MXI-2 Reference Manual

Chapter 4 PXI-8320 Configuration and Installation
1 DRAM

Configuration EEPROM

Onboard DRAM

MXI-2 Configuration Reference Manual
1
Figure 4-1. PXI-8320 Parts Locator Diagram
The PXI-8320 has an onboard EEPROM, which stores default register
values that are loaded at power-on. The EEPROM is divided into two
halves—a factory-configuration half and a user-configuration half—so you
can modify the user-configurable half while the factory-configured half
stores a back-up of the default user settings. The factory configuration is a
minimal configuration you can use to boot your PXI-8320 regardless of the
changes made to the user configuration. For information about configuring
the onboard EEPROM, refer to Appendix B,
The PXI-8320 can accommodate one DRAM SODIMM. Table 4-1 lists the
SODIMMs you can use. The PXI-8320 can hold up to 16 MB of onboard
memory. The PXI-8320 supports DRAM speeds of 80 ns or faster.
2 U6
4-2
2
EEPROM Configuration.
ni.com