National Instruments MXI-2 Reference Manual page 25

Chapter 3 PCI-MXI-2 Universal Configuration and Installation
1 PCI-MXI-2 Universal Board
MXI-2 Configuration Reference Manual
4. Locate the metal bracket that covers the cut-out in the back panel of
the chassis for the slot you have selected. Remove and save the
bracket-retaining screw and the bracket cover.
5. Touch the metal part of the power supply case inside the computer to
discharge any static electricity that might be on your clothes or body.
6. Line up the PCI-MXI-2 Universal with the MXI-2 connector near
the cut-out on the back panel. Slowly push down on the top of the
PCI-MXI-2 Universal until its card-edge connector rests on the
expansion slot receptacle. Using slow, evenly distributed pressure,
press the PCI-MXI-2 Universal straight down until it seats in the
expansion slot.
7. Reinstall the bracket-retaining screw to secure the PCI-MXI-2
Universal to the back panel rail.
8. Check the installation.
9. Replace the computer cover.
Figure 3-2 shows how to install the PCI-MXI-2 Universal.
1
2
2 PCI Bus Slot
Figure 3-2. Installing the PCI-MXI-2 Universal in a Computer
3
3-4
3 PC
ni.com