Product Description; Applications - Simtronics MultiFlame DF-TV7-T Operating Manual

1.

PRODUCT DESCRIPTION

MultiFlame DF-TV7-T was designed to detect hydrocarbon fires, while minimizing false
alarms. This detector is equipped with an intelligent optical self-test. It is certified and may
be installed in SIL2 level system. It can be directly connected to a wide range of traditional or
fire controllers and on Programmable Logic Controllers (PLC).
DF-TV7-T can be fully configured using the portable communication terminal (TLU600),
providing flexibility to the user. Time delay, sensitivity and outputs configuration can be full
set up via the TLU600, a hazardous area approved remote control. Optical and electronic
parts, and outputs (current, relay...) of the detector can be controlled by the TLU.
The MultiFlame product family consists of two detector versions:
•
DF-TV7-T multi-spectrum IR Flame detector
•
DF-TV7-V combined UV and IR
The MultiFlame models are also available for use in an addressable network system with
distributed intelligence SYNTEL. This version is named DF-RV7-*. For more information,
please refer to the Syntel module interface operating manual.

1.1. Applications

•
Refineries
•
Drilling and Production Platforms
•
FPSO
•
Fuel Loading Facilities
•
Compressor Stations
•
LNG/LPG Processing and Storage
•
Gas Turbines
•
Chemical Plants
•
Aircraft Hangars
•
Sports (Stadia / Gymnasia)
The sensitivity of flame detector depends on many factors including, fuel type, fire size,
atmospheric conditions (wind, rain, fog, etc...), the angle between the fire and detector as
well as line of sight obstructions.
MultiFlame DF-TV7 Page 6 / 56 NOSP16358-03 [04/2016]