Screen Size Adjustment - Sanyo PLC-XU4000 Owner's Manual

Hide thumbs Also See for PLC-XU4000:

Service manual (110 pages)

Owner's manual (78 pages)

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

Store

To store the adjusted data, select Store and press the Point

► button or the SELECT button. Use the Point

to select one from Image 1 to 4 and press the SELECT

button.

A confirmation box appears and then select yes. Stored

data can be called up by selecting an Image (1–4) in the

Image Mode Selection on page 33.

This projector has the picture screen resize function, which

enables you to customize the image size.

Press the MENU button to display the On-Screen

Menu. Use the Point

then press the Point

Use the Point

and then press the SELECT button .

Normal

Provide the image to fit the screen size.

Full

Provide the full screen image.

wide (16:9)

Provide the image at the 16:9 wide screen ratio.

Zoom

Scale the image proportionally to fit the entire screen. Either

side of image may go over the screen.

True

Provide the image in its original size. When the original

image size is larger than the screen size (1024 x 768), the

projector enters to the panning mode automatically. Use the

Point ▲▼◄► buttons to pan the image. When adjusted,

the arrows will turn red. When reached to the correction

limits, the arrows will disappear.

Custom

Provide the last stored aspect screen image.

 Note:

• This projector cannot display any resolution higher than 1920 x 1200. If your computer's screen resolution is

higher than it, reset the resolution lower before connecting to the projector.

• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

• True and Digital zoom +/– cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is

selected in the PC System Menu (p.29).

Downloaded From projector-manual.com Sanyo Manuals