Screen Size Adjustment - Sanyo PJLink PLC-WXU30K Owner's Manual

Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an "Image (1–4)" in the
Image Mode Selection on page 36.
Quit
Exit the Image Adjust Menu.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Screen Menu icon.

Use the Point
ed
pointer to the desired function and then press the
SELECT button.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800), the
projector enters to the panning mode automatically. Use the
Point buttons to pan the image. When adjusted, the
ed7 8
arrows will turn red. When reached to the correction limits,
the arrows will disappear.
Full
Provide the full screen image.
38
buttons to select one
ed
buttons to move the red
7 8
buttons to move the red frame
Store icon
Screen Menu
Screen Menu icon
Move the red frame
pointer to the function
and press the
SELECT button.
Notes:
✔
• This Screen Menu cannot be operated
when 720p(HDTV), 1035i (HDTV), or
1080i (HDTV) is selected in the PC
System Menu (p.32).
• This projector cannot display any
resolution higher than 1600 x 1200. If
your computer's screen resolution is
higher than it, reset the resolution to the
lower before connecting to the projector.
• The image data in other than 1280 x 800
is modified to fit the screen size in initial
mode.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.32).
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
A confirmation
box appears
and then select
[Yes]