Back View Of The System - Dell EMC PowerEdge R6415 Installation And Service Manual

3 Drive
NOTE: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn on.
Table 9. Drive indicator codes
Drive status indicator code
Flashes green twice per second
Off
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Solid green
Flashes green for three seconds, amber for three seconds, and
then turns off after six seconds

Back view of the system

Figure 12. Back view of the system with redundant PSU
Figure 13. Back view of the system with cabled PSU
Table 10. Back view of the system
Item Ports, panels, or slots
1 Serial port
2 iDRAC9 dedicated port
16 Dell EMC PowerEdge R6415 overview
Condition
Identifying drive or preparing for removal.
Drive ready for removal.
NOTE:
initialized after the system is turned on. Drives are not ready
for removal during this time.
Predicted drive failure.
Drive failed.
Drive rebuilding.
Drive online.
Rebuild stopped.
Icon Description
Enables you to connect a serial device to the system. For more
information, see the
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at Dell.com/idracmanuals.
The drive status indicator remains off until all drives are
Technical specifications section.