Danfoss VLT AQUA FC 202 Operating Instructions Manual page 134

Troubleshooting
No. Description
220 Overload Trip
98 Clock Fault
243 Brake IGBT
244 Heatsink temp
245 Heatsink sensor
246 Pwr.card supply
247 Pwr.card temp
248 Illegal PS config
250 New spare part
251 New Type Code
Table 7.1 Alarm/Warning Code List
(X) Dependent on parameter
1) Cannot be Auto reset via 14-20 Reset Mode
A trip is the action when an alarm has appeared. The trip coasts the motor and can be reset by pressing [Reset] or making a
7 7
reset by a digital input (Par. 5-1* Digital Inputs [1] Reset). The origin event that caused an alarm cannot damage the
frequency converter or cause dangerous conditions. A trip lock is an action when an alarm occurs, which may cause
damage to frequency converter or connected parts. A Trip Lock situation can only be reset by a power cycling.
LED indication
Warning
Alarm
Trip locked
Table 7.2
132
VLT AQUA Drive FC 202 Operation Instructions
Warning Alarm/Trip
X
X
X
yellow
flashing red
yellow and red
MG20P402 - Rev. 2013-12-16
Alarm/Trip Lock
X
X
X X
X X
X X
X X
X X
X
X X
Parameter
Reference
0-7*