Attention
In case you perform a major downgrade with a previous release line (e.g. 3.7.0
to 3.6.0), please ensure to always use the latest release of that branch (i.e.
3.6.0.X) as only those tend to be fully forward-compatible. Also keep in mind,
that some hardware features may not work (e.g. if not implemented in that
version). In doubt, please consult our support team.
A software image can be either uploaded via the Web Manager or retrieved from a speci c
URL. It will be unpacked and deployed to a spare partition which gets activated if the update
completed successfully. The whole procedure is accompanied by all green LEDs ashing
up, the subsequent system reboot gets denoted by a slowly blinking Status LED. The back-
uped con guration will be applied at bootup and the Status LED will blink faster during this
operation. Depending on your con guration, this may take a while.
Automatic Software Update
This menu can be used to run a automatic software update of the system.
Parameter
Status
Time of day
Operation
Remark: SSL certi cates of HTTPS URLs will be only veri ed if a list of CA root certi cates are
provided under 5.8.8.
After the new software has been installed, the latest running con guration will be applied
afterwards during bootup. This is indicated by a faster green blinking of the Status LED.
5.8.4. Module Firmware Update
This menu can be used to perform a rmware update of a speci c module.
Parameter
Update operation
Module
NB2800 User Manual 4.2
Automatic software update
Enable/disable automatic software update
Every day at this time the router will do a check for updates
Download latest image from the the server or specify the URL
where the software update package should be downloaded
from. Supported protocols are TFTP, HTTP, HTTPS, and FTP.
protocol://server/path/file
Provide a URL like
Module Firmware Update
The update operation method being used. You can either up-
load a rmware package or download it from a specifc URL.
The module which shall be updated.
159
Need help?
Do you have a question about the NB2800 and is the answer not in the manual?
Questions and answers