Dhcp Server - NetModule NB2800 User Manual

5.7.2. DHCP Server

This section can be used to individually con gure the Dynamic Host Con guration Protocol
(DHCP) service for each LAN interface which will serve dynamic IP addresses to hosts in the
local network. You may also have a look to the status page where you can nd an overview
about negotiated client addresses.
Please note that WLAN interfaces (for each SSID) will pop up here as well in case you have
con gured an access point respectively.
The following settings for each interface can be applied then:
Parameter
Operation mode
First lease address
Last lease address
Lease duration
NB2800 User Manual 4.2
Figure 5.38.: DHCP Server
DHCP Server Settings
Speci es whether the DHCP server is enabled or not
The rst address out of the range of IP addresses given to
hosts
The last address out of this range
Number of seconds how long a given lease shall be valid until
it has to be requested again
121