NetModule NB2800 User Manual page 114

Networks
When creating Security Associations, IPsec will keep track of routed networks within the tun-
nel. Packets will be only transmitted when a valid SA with matching source and destination
network is present. Therefore, you may need to specify the networks right and left of the
endpoints by applying the following settings:
Parameter
Local network
Local netmask
Peer network
Peer netmask
NAT address
Client Management
Once you have successfully set up an IPsec tunnel, you can manage and enable clients con-
necting to your service. It is possible to generate and download expert mode les for en-
abled clients which can be used to easily populate each client.
NB2800 User Manual 4.2
IPsec Network Settings
The address of your local area network
The netmask of your local area network
The address of the remote network behind the peer
The netmask of the remote network behind the peer
Optionally, you can apply NAT (masquerading) for packets
coming from a different local network. The NAT address must
reside in the network previously speci ed as local network.
105