Table of Contents
Advertisement
GENERAL SETTING
PASSWORD SET setting
For network connection there are three access levels, each of which
has a password. Each password can consist of a combination of 4 to
8 alphanumeric symbols.
Note: The cursor cannot be moved to ID or PASSWORD (4-8).
Example: Set AB123456 as the ID1 password.
1
Use the jog dial to move the cursor to ID1, and then turn the
shuttle dial clockwise.
The initial digit 1 of the password entry flashes.
The characters that can be used in the password are: 0, 1 ...
9, A, B ... Z
Note:
ID1: This level can only observe a live image through the network.
ID2: This level can observe a live image and play back and search
recorded images through the network.
ID3: This level allows all digital video recorder operations and
settings to be carried out.
2
Use the jog dial to display "A" , and then turn the shuttle dial.
The second digit 1 flashes.
ID1
: A111----
3
Use the jog dial to display "B" , and then turn the shuttle dial.
The third digit 1 flashes.
ID1
: AB11----
4
Repeat this procedure to continue entering "123456" , and
then turn the shuttle dial clockwise.
The cursor moves to ID2.
English
5
As required, use the same procedure to set passwords for ID2
and ID3, and then turn the shuttle dial clockwise.
The cursor moves to LAN CARD.
6
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
7
Computer operation
Refer to the separate Manual for Remote Operation by Network
Connection.
79
Advertisement
Table of Contents
