Table of Contents
Advertisement
BUZZER SET SETTING
Main menu 2
Sets the buzzer to sound when not
recording.
The buzzer can be made to sound as a warning during an alarm
and when the hard disk becomes full.
1
Press the MENU button twice and display the MAIN MENU
2 screen.
The cursor moves to DISPLAY SET/VIDEO LOSS SET.
MENU
2
Use the jog dial to move the cursor to the BUZZER SET
setting, and then turn the shuttle dial clockwise.
The BUZZER SET sub-menu appears, and the cursor moves
to ALARM.
Sub-menus
3
Turn the shuttle dial clockwise.
"OFF" flashes. Use the jog dial to change the setting to "ON"
or "OFF".
ON: The buzzer will sound when an alarm is triggered.
4
If necessary, follow the same procedure to change the
buzzer setting (ON/OFF).
DISK FULL (ON):
Sets whether the buzzer sounds when disk overwriting is off
and the hard disk is nearly full.
DISK ERROR (ON):
Sets whether the buzzer sounds when there is a hard disk
error.
LOCK WARNING (ON):
When the security lock is engaged and a locked button is
pressed, the buzzer sounds.
Note: When an item is set to "ON", the buzzer sounds twice
KEY IN (ON):
Sets the buzzer to sound each time an operating button is
pressed.
NON REC (ON):
Sets the buzzer to sound when recording stops by itself and
when another person deliberately stops recording.
5
Press the EXIT/OSD button.
The display returns to the normal screen.
60
Sets the buzzer to sound during alarms.
Sets the buzzer to sound when there is
no recording space left.
Sets the buzzer to sound when there is a
problem with the hard disk.
Sets the buzzer to sound when the
security lock is engaged.
Sets the buzzer to sound when an
operating button is pressed.
at an interval of about 0.5 seconds.
EXIT/OSD
English
Advertisement
Table of Contents
