Dip-Switch Settings; Inactivity Time-Out Timer - Magnetek Flex Pro Tethered Controller Instruction Manual

4. Dip-Switch Settings

A. Inactivity Time-Out Timer
Bits 6 and 7 on the dip-switch allows the user to define a time after which, if no buttons on
the controller are pressed, the Flex Pro tethered controller will send an OFF command to
the equipment and power down. To restart, the user must turn the On/Off/Start switch to
the Off position, then back to On again to resume operation.
Dip-
Time Out switch
Setting
5 minutes 01
10 minutes 10
15 minutes 11
Never shut off 00
(Fig. 07)
(Fig.08)
Flex Pro Tethered Controller
Instruction Manual
July 2011
11 of 17