Magnetek Flex Pro Tethered Controller Instruction Manual page 8

2.4: SAFETY INFORMATION AND RECOMMENDED TRAINING FOR REMOTE CONTROLLED
EQUIPMENT OPERATORS
Anyone being trained to operate remote controlled equipment should possess as a minimum the following knowledge
and skills before using the remote controlled equipment.
The operator should
:
 have knowledge of hazards pertaining to equipment operation
 have knowledge of safety rules for remote controlled equipment
 have the ability to judge distance of moving objects
 know how to properly test prior to operation
 be trained in the safe operation of the controller as it pertains to the crane, hoist, lifting device or other material
handling equipment being operated
 have knowledge of the use of equipment warning lights and alarms
 have knowledge of the proper storage space for a controller when not in use
 be trained in transferring a controller to another person
 be trained how and when to report unsafe or unusual operating conditions
 test the controller emergency stop and all warning devices prior to operation; testing should be done on each
shift, without a load
 be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting device, or
other material handling equipment that utilizes the remote control
 know how to keep the operator and other people clear of lifted loads and to avoid "pinch" points
 continuously watch and monitor status of lifted loads
 know and follow cable and hook inspection procedures
 know and follow the local lockout and tagout procedures when servicing remote controlled equipment
 know and follow all applicable operating and maintenance manuals, safety procedures, regulatory
requirements, and industry standards and codes
The operator shall not

lift or move more than the rated load

operate the material handling equipment if the direction of travel or function engaged does not agree with
what is indicated on the controller

use the crane, hoist or lifting device to lift, support or transport people

lift or carry any loads over people

operate the crane, hoist or lifting device unless all persons, including the operator, are and remain clear of
the supported load and any potential pinch points

operate a crane, hoist or lifting device when the device is not centered over the load

operate a crane, hoist or lifting device if the chain or wire rope is not seated properly in the sprockets, drum
or sheave

operate any damaged or malfunctioning crane, hoist, lifting device or other material handling equipment
:
Flex Pro Tethered Controller
Instruction Manual
July 2011
6 of 17