Selecting A Different Channel; Flash And Call Waiting - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
BASICS

Selecting a different channel

If you encounter interference while using your phone, you can
manually change the phone´s channel for clear operation. This
function works only when the phone is in use. Press the SELECT/CH
Scanning
key. ¨ ¨ appears on the display, indicating the phone is
changing to another channel.
Page
To locate the handsets (while it's off the base),
press the PAGE key on the base. Both handsets
beep for 60 seconds.
Paging of both handsets is canceled when
pressing any key on either handset or pressing
the PAGE key again.
Note:
Paging is also canceled when the phone receives an incoming call.

Flash and call waiting

If you have "Call Waiting" service and
a call waiting tone sounds while you
are on a call, press the TALK/FLASH key
to accept the waiting call. There is a
short pause, then you will hear the
new caller. To return to the original
caller, press the TALK/FLASH key again.
Note:
You must subscribe through your local telephone company to receive Call
Waiting service.
3/7/05 5:22 PM Page 19
E19