Using The Caller Id List - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
CALLER ID

Using the Caller ID list

Calling a party from the Caller ID list
You can place a call from the Caller ID list. The cordless phone stores
up to 30 messages (Caller ID names/numbers).
1
Press the CID/MENU key. Select the phone
number that you want to dial by pressing
VOL/RING or
the
2
Press the TALK/FLASH key. The displayed
phone number dials automatically.
Notes:
• You can place a call from Talk Mode. Press the TALK/FLASH key, then press
the CID/MENU key. Select the phone number that you want to dial by
pressing the
key. The displayed phone number will be dialed.
• You cannot make a call from the Caller ID list if your cordless phone is
connected to a private branch exchange (PBX).
Long Distance calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed
(in step 1) will set or cancel the prefix ¨
long distance call. Pressing 3 will set or cancel the stored area code.
Note:
When a long distance call has been set, ¨
E36
3/7/05 5:23 PM
FEATURES
VOL/RING key.
VOL/RING or VOL/RING key. Press the SELECT/CH
1
¨ in the display to set up for a
1
¨ appears in the display.
Page 36