Optional Feature Menu; Handset Ringer Level Selection; Programming Your Area Code; Clearing Message Indications - Sanyo CLT-9839 User Manual

Optional Feature Menu

Using the Option List display, you can change the settings of many optional features
of your telephone:

1) Handset ringer level selection

2) Programming your own area code

*3) Clearing message indications

*4) Programming voice mail number
5) Programming a greeting display

*6) Call waiting OFF/ON/OPTIONS selection

7) Selecting the display language

*You may be required to subscribe to specific telephone company services.
Contact your local telephone company for more information.
To review the current settings:
1
Press .
MENU
2
Press or to scroll through the feature list. You can also enter the number
of the feature you want to review (1 to 7).
1.Ringer is High
=Change =Next
Press to change this setting, or
3
Press or
END MENU
1) Handset ringer level selection
Three ringer levels are provided:
High, Low and OFF. (Factory setting is High).
To change the ringer Level:
1
Press .
MENU
2
Press or 1 .
*Continued on next page.
The handset ringer is set to HIGH.
to review the next setting.
to finish reviewing.
Option list
1.Ringer is High
=Change
E12
Optional Feature Menu
3
Press
hear the ringer at the selected volume level.
The display also shows the selection.
4
Press
If the ringer is set to OFF (the display shows the "Ringer is OFF"), the handset
will not ring when a call comes in.

2) Programming your area code

When you program your area code in the telephone memory, the caller ID display
does not attach an area code to incoming local numbers having the same area
code as yours. This allows you to dial a local number directly from the callers list
without having to remove the area code first.
To program your area code
1
Press
2
Press
or press 2 .
3
Press
4
Enter your area code (3 digits).
To make correction, press
re-enter.
5
Press
You hear a beep, and the display shows the area
code you entered.
6
Press
=Next
If you press
Cannot Save
=Next
. Each time you press the key, you
or to finish ringer level setting.
END MENU
MENU .
until the display shows 2.Area code>
.
and then
ERASE
MEMO
.
END or MENU to return to the standby mode.
without entering a 3-digit number, the display shows
MEMO
2.Area code>
and automatically returns to
E13
1.Ringer is Low
=Change =Next
Option list
=Next
2.Area code>
=Next
=Add
2.Area code>
2.Area code> 123
MEMO=OK
2.Area code> 123
- confirmed -
display.