Erasing A Stored Name And Phone Number - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
DIRECTORY

Erasing a stored name and phone number

1
Press the MEM key in standby mode.
Select Memory
¨
2
Press the
(0 - 9) to select the memory location you would like to erase.
3
Press the MEM or SELECT/CH key.
The name and phone number selected
appears with the memory location
number that you have selected in
the display.
4
Press the MEM or SELECT/CH key again.
5
Press the
pointer down to ¨
6
Press the MEM or SELECT/CH key.
Delete MemoryXX?
¨
7
Press the
Yes
pointer to ¨
8
Press the SELECT/CH or DELETE/TRANS key.
You hear a confirmation tone, and
MemoryXX Deleted
¨
9
After about 2 seconds, the display returns
to the Select Memory screen.
You may delete the information in
another memory location (return to
step 2) or press the END key to return to
standby mode.
3/7/05 5:22 PM
¨ is displayed.
VOL/RING or VOL/RING key, or enter a number
VOL/RING key to move the
Delete MemoryXX
¨.
¨ appears.
VOL/RING key to move the
¨.
¨ appears.
Page 29
E29