Entering Your Area Code - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
GETTING

Entering your area code

If you enter a 3-digit area code number in the
local area code does not appear in Caller ID messages. Do not
program this option if your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local
seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
1
When the phone is in standby mode,
press and hold the CID/MENU key. The
following screen appears.
2
Press the
the pointer to ¨
3
Press the SELECT/CH key.
4
Use the number (0 - 9) or DELETE/TRANS
key to enter the 3-digit area code.
5
Press the SELECT/CH key. A confirmation
tone sounds and the displayed area code is entered.
6
Press the END key or return the handset to the base unit or
charging cradle to complete the setting. The handset returns to
standby mode.
Note:
When the area code has already been stored in
memory, the stored area code will be displayed.
To change it, use the DELETE/TRANS key and
number keys to enter the new area code.
Then press the SELECT/CH key. A confirmation tone sounds.
To complete the setting, press the END key or return the handset to the base
unit or charging cradle.
E14
3/7/05 5:22 PM
STARTED
VOL/RING key twice to move
Area Code
¨.
Page 14
Area Code
option, your