UP016DH(CLT5812) ENG OM
GETTING
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1
Plug the AC adapter into
the DC IN 9V jack.
2
Wrap the AC adapter cord
inside the molded wiring
channel as shown.
3
Plug the AC adapter into
a standard 120V AC
wall outlet.
4
Plug the telephone line
cord into the TEL LINE
jack. Wrap the cord inside
the molded wiring
channel as shown.
5
Plug the telephone
line cord into the
telephone outlet.
6
Align the mounting slots on the base with the mounting posts
on the wall. Then push in and down until the phone is
firmly seated.
IMPORTANT
DO NOT use an AC outlet controlled by a wall switch.
3/7/05
5:21 PM
Page 11
STARTED
E11