Sanyo CLT-5812 Instruction Manual page 30

UP016DH(CLT5812) ENG OM
DIRECTORY
8
Press the MEM or SELECT/CH key.
If you changed either a name or phone
number, a confirmation display shows up.
If it is correct, press the
to move the pointer to ¨
SELECT/CH key. You will hear a
confirmation tone, and the following
screen appears. The memory storage
is complete.
For example, if you store a name and
number into memory location number 01,
the display shows ¨
After about 2 seconds, Select Memory
screen is displayed.
9
Press the END key to return to standby mode.
E28
3/7/05 5:22 PM Page 28
VOL/RING key
Yes
¨ and press the
Memory01 Stored
¨.