Pre-Dialing; Changing The Pre-Dial Number; Redialing; Fast Redialing - Sanyo CLT-U12 Instruction Manual

BASICS
Pre-dialing (up to 32 digits)
1. Make sure the phone is OFF (not in TALK mode).
2. Enter the telephone number. The number is displayed as you enter it.
3. Press TALK.
Note: Pressing *TONE will exit pre-dialing.

Changing the pre-dial number

1. Make sure the phone is OFF.
2. Enter the telephone number.
3. Press CH/DEL to delete digits one by one.
4. Re-enter the number.

Redialing

1. Make sure the phone is OFF.
2. Press TALK.
3. Press REDIAL to redial the last number (up to 32 digits).

Fast redialing

1. Press TALK (not in TALK mode).
2. Enter the telephone number you want to dial.
3. If the line is busy, press REDIAL. The phone will drop the line for two
seconds and redial again.

FLASH key

Use the FLASH/PROG key to activate custom calling services such as Call
Waiting.
Tip: Do not use TALK to activate custom calling services such as Call Waiting,
or you will hang up the phone.

CH (Channel)/DEL key

While talking, you might need to manually change the channel to get rid of static.
Press the CH/DEL key to switch to a clear channel.
14