Setting Menu Options - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
GETTING

Setting menu options

There are five setup options available. They are Automatic Talk,
CIDCW (Caller ID on Call Waiting), Area Code, Dial and Language.
Automatic Talk allows you to answer the phone without pressing the
TALK/FLASH key.
If the phone rings when Automatic Talk is On, simply remove the
handset from the base or charging cradle and the phone
automatically answers the call. If the phone rings when Automatic
Talk is Off, you must press the TALK/FLASH key to answer the call.
Automatic Standby allows you to hang up by simply returning the
handset to the base or charging cradle.
CIDCW and Dial Mode options can only be set by using Handset 1.
If you try to set by using Handset 2, you will not see these options
listed on the LCD screen.
To confirm which handset is HS1, refer to the display indicating
HS1 HS2
" " or " ".
Automatic Talk, Area Code and Language options can be set by using
either Handset 1 or Handset 2.
Changing your Automatic Talk (Auto Talk) and CIDCW:
1
When the phone is in standby mode,
press and hold the CID/MENU key.
The following screen appears.
2
VOL/RING or
Use the
the selection that you would like to change.
Press the SELECT/CH key to toggle between ¨
3
Press the END key and return the handset to the base unit to
complete the setting. The handset returns to standby mode.
3/7/05 5:21 PM Page 13
STARTED
VOL/RING key to move the pointer to
On Off
¨ and ¨ ¨.
E13