Adjusting The Handset Ringer And Earpiece Volume - Sanyo CLT-5812 Instruction Manual

UP016DH(CLT5812) ENG OM
BASICS

Adjusting the handset ringer and earpiece volume

Handset ringer tone and volume
Press the volume up key or volume down
key (labeled as, the
VOL/RING key) in standby mode to
select one of five ringer tones and
volume combinations.
Earpiece volume
Pressing the volume up key or volume
down key (labeled as, the
VOL/RING key) during a call will change
the earpiece volume of the handset. This
setting will remain in effect after the telephone call has ended.
Note:
When you press volume up key (the
volume down key (the
Temporarily mute ringer
If one handset is off the base or charging cradle, simply press the
END key to temporarily mute the incoming ring only for the handset.
The ringer will sound with the next incoming call.
3/7/05 5:22 PM Page 17
VOL/RING or
VOL/RING or
VOL/RING key) in Maximum mode or
VOL/RING key) in Low mode, an error tone sounds.
E17