Download Print this page

Adjusting The Handset Ringer And Earpiece Volume - Sanyo CLT-5810 Instruction Manual

5.8-ghz cordless telephone with call manager features

Hide thumbs Also See for CLT-5810:

Table of Contents

UP015DH(CLT5810) ENG OM

BASICS

Adjusting the handset ringer and earpiece volume

Handset ringer tone and volume

Press the volume up key or volume down

key (labeled as, the

VOL/RING key) in standby mode to

select one of five ringer tones and

volume combinations.

Earpiece volume

Pressing the volume up key or volume

down key (labeled as, the

VOL/RING key) during a call will

change the earpiece volume of the

handset. This setting will remain in effect

after the telephone call has ended.

Note:

When you press volume up key (the

mode or volume down key (the

an error tone sounds.

Temporarily mute ringer

If the handset is off the base, simply press the END key to

temporarily mute the incoming ring. The ringer will sound with the

next incoming call.

3/9/05

10:36 AM

VOL/RING or

VOL/RING key) to the maximum

VOL/RING key) to the lowest mode,

Page 15

E15

Table of Contents