Chain Dialing From The Phonebook; Switching To The Handset Speakerphone During A Call; Adjusting The Ringer, Earpiece And Speaker Volume - Sanyo CAS-D6325 Instruction Manual

USING
YOUR PHONE

Chain Dialing from the Phonebook

You can use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter once your
call connects.
1.
Dial the number normally.
2.
After the call connects, press
3.
Use or to select the phonebook entry that contains the digits you want to send.
4.
Press MENU/SELECT.

Switching to the Handset Speakerphone During a Call

To switch a normal call to the speakerphone, press
press .

Adjusting the Ringer, Earpiece and Speaker Volume

Adjusting the Ringer Volume
You can choose from four ringer volume settings (off, low, medium, and high) on the handset or
the base.
Handset: With the phone in standby, use
softer or turn it completely off.
Base: While the phone is ringing or in standby, use VOLUME + to make the ringer volume louder
or VOLUME - to make it softer or turn it completely off.
Adjusting the Earpiece Volume
You can choose from six volume levels for the earpiece. To adjust the earpiece volume while on a call, press
louder) or (to make it softer).
UC590EH.indd E25 UC590EH.indd E25
.
on the handset. To switch from a speakerphone call to a normal call,
to make the ringer volume louder or
E25
to make it
(to make it
8/19/2008 11:39:05 AM 8/19/2008 11:39:05 AM