Chime Feature - Menvier Security TS400 Operating Instructions Manual

This option allows user 1 to select which zones will be omitted when a "Home Set" is selected. The
final exit zone cannot be omitted when selecting zones.
1 Enter the first 3 digits of your passcode then [HOME]
then [7].
2 Press keys [1] to [5] to turn zone indicators 1 - 5 on and
off. When a zone indicator is lit the zone will be omitted.
When a zone indicator is off the zone will be armed.
3 When completed press [0]. A rising acceptance tone
will be heard and the system returns to the unset
mode.
If zones 3, 4 or 5 cannot be selected then they have
been programmed by your alarm company for
alternative operation, i.e. keyswitch, Fire or PA.
This feature allows the selected zones to generate a two-tone beep every time the zone is
triggered when the system is unset. This may be used as a courtesy warning of the opening of a
shop door etc.
1 Press [HOME] then [HOME].
2 Press keys [1] to [6] to turn zone indicators 1 - 5 on and
off (6 is used for the final exit zone). When a zone
indicator is lit the zone will be selected as "Chime".
When a zone indicator is off the zone will not chime.
3 When completed press [0]. A rising acceptance tone
will be heard and the system returns to the unset
mode.
If zones 3, 4 or 5 cannot be selected then they have
been programmed by your alarm company for
alternative operation, i.e. keyswitch, Fire or PA.
Home Set Configuration

Chime Feature

? ? ?
Press keys [1] to [5] to select zones.
e.g. Press [4] then [5].
Zones 4 and 5 are now selected
to be omitted.
When finished press
The system is now in the unset mode.
Press keys [1] to [6] to select chime zones.
e.g. Press [6] for the final exit.
The final exit zone is now selected
for chime.
When finished press
The system is now in the unset mode.
7
0
0
7