Basic Functions; Sensor Buttons; Activating And Deactivating; Selecting A Source - Teufel Impaq 8000 Technical Description And User Manual

Basic functions

Sensor buttons

The buttons (3) and SRC (8) on the front side of
the Impaq 8000 are illuminated sensor buttons: Light-
ly touching them will cause them to switch.

Activating and deactivating

• Switch the Impaq 8000 on or to standby with the
button (1) or (54). When in standby, the button
(1) will be illuminated in red.
• Standby does not disconnect the device from the
mains. Pull the mains plug out of the socket to
completely deactivate it.

Selecting a source

After turning the device on, the last used source
device is selected.
• With the sensor button SRC (8), you can switch the
source in the following order:
HDMI 1–3, TV, BT (Bluetooth
OPTICAL, AUX, DISC
• After pushing the sensor button SRC (8), you can
also select the desired source with the control dial
(5). Tap the control dial to switch.
• Select the source with the buttons SOURCE +/–
(49) on the remote control.
• Or switch the source with the direct select buttons:
TV (ARC) (45) – TV audio
RADIO (35) – FM (USW)
(34) – BT (Bluetooth
The selected source is shown on the display (4).
• Playback of BD/DVD/CD, a USB stick or media
server (DLNA) is started in the main menu (access
with the button (27)) under the item "My media"
(see page 20).
• If you insert a CD, DVD or Blu-ray disc, it will start
automatically (see page 34).
• You can switch to the audio signal of the TV set
with the button TV ARC (45). Prerequisite: The
Impaq 8000 is connected to an ARC-capable
HDMI input of the TV, the TV's CEC function (that
is, "Viera Link", "Anynet+", "Simplink" or "Bravia
Synch") is activated just like the ARC function of the
Impaq 8000 (see page 26).
16 • Impaq 8000
®
), TUNER, COAXIAL,
®
)
1 3
54
1 2
4 5
7 8
0
SEARCH
OSC
49
SOURCE
45
TV /ARC) RADIO
LEVEL TONE
LIP SYNC SUBTITLE
MEMORY
8 4
3
6
9
CLEAR
27
VOLUME
34
35
SURROUND
REPEAT
INFO
RDS