Teufel Impaq 8000 Technical Description And User Manual page 47

Problem
With stereo sources such
as the playback of radio
or an MP3 player, the
rear satellites and/or the
center speaker do not
emit sound.
No Dolby/DTS multi-chan-
nel sound is emitted via
the connected digital
source.
"No disc" on the display.
No or distorted
music playback.
BD Live function disrupt-
ed.
®
No sound in Bluetooth
mode.
No sound via cable (AUX). Volume of the playback program
You cannot toggle sur-
round mode.
Possible cause
MP3s, radio as well as many TV
programmes only transmit stereo
sound.
With the playback of digital sourc-
es, the Impaq 8000 automatically
recognises the format of the sig-
nal source. If the Impaq 8000 fails
to play multi-channel sound, there
is presumably no multi-channel
signal. Digital signal sources do
not always transmit multi-channel
sound, but may also emit regular
stereo sound (2.0).
CD/DVD/BD is damaged, dirty,
incompatible or inserted upside
down.
Incorrect file format. See table
„Supported data formats" on page
34.
File damaged.
No Internet connection.
No USB stick has been inserted.
BD Live storage full.
®
No Bluetooth connection.
Impaq 8000 has not been select-
ed as the output device.
®
Bluetooth connection impaired
by another radio system (e.g.
cordless telephone or microphone,
Wi-Fi).
has been set to zero.
You are probably using a digital input. If a multi-channel Dolby or DTS signal is
received on this input, the Impaq 8000 will automatically switch to the correct sur-
round mode.
Solution
Switch the Impaq 8000 to a Pro-Logic mode or
one of the DSP modes (5.1 Stereo). See „Sur-
round mode selection" on page 17.
Clean or change the disc.
Delete or skip the incorrect files.
Test the network settings and correct them if
necessary (page 23).
BD Live requires a USB stick with 1 GB of capac-
ity.
Check the memory and clear if necessary (page
26).
Establish a connection (see page 32).
On your source device, select "Impaq 8000" as
®
the Bluetooth output device.
Set up the Impaq 8000 and/or the source de-
vice in another location. Move to another room
to test.
Carefully increase the volume on the source
device.
• Impaq 8000 47